1.Description
Pipeline water plugging airbag working principle is to use high quality rubber pipe plugging airbag, expansion by aeration method, when the gas pressure inside the water plugging airbag to specified requirements, the water plugging balloon full of the whole pipeline section, using pipe plug leak sealing bag wall and pipe produced by friction, so as to achieve the aim of no water seepage in the goals section.
2.Advantage
Airbag rubber is made of pure natural rubber and special fiber woven reinforcing cloth by special technology. Experienced hands to ensure that each airbag can meet the design requirements; Each airbag was tested at 1.2 times the maximum working pressure for 12 hours in the factory before delivery to ensure that each airbag received by the customer was qualified.
3.Process introduction
Product information
Size(D×L)/mm | Maximum working pressure/ bar |
300×900 | 1.0 |
400×900 | 1.0 |
500×1100 | 1.0 |
600×1200 | 0.8 |
700×1200 | 0.8 |
800×1200 | 0.6 |
900×1200 | 0.6 |
1000×1600 | 0.6 |
1200×1600 | 0.6 |
