1.Description
The new technology of trunk road detection is multi-station deployment and joint detection, which can meet the customers' requirements of speed and efficiency to the greatest extent.
2.Advantage
A device consists of a portable suitcase. The toolbox contains an adsorptive receiving head, a straight connector, and the transmitter equipment is presented from the inside of the transmitter box. In addition, it is equipped with an analytical working computer.
Equipment Transmitter
Working Computer
3.Filed of application
Suitable for pipe diameter from DN300 to DN3000
The node may be connected to a channel well, surface, or other water delivery line.
The distance between two nodes can be set from 500 to 1000 meters
1. Severe Pipe Damage
When sewer pipes are broken or ruptured, the sewage won’t be able to properly drain through the system—leading to immediate and frequent backups. Common causes of sewer pipe damage include:
Sewer pipe rupture due to shifting soil, settling, increased traffic on the ground above, or use of heavy construction equipment above ground.
Corrosion of an older pipe, causing the pipe to break or collapse.
Leaking joints where the seals between sections of pipe have broken, allowing water and sewage to escape.
2. A Sagging Sewer Line
While this is out of a homeowner’s control, sagging sewer lines happen over time. This “bellied” pipe occurs when a section of the pipe has sunk due to ground or soil conditions.
The low spot in the line will begin to collect paper and waste—resulting in repeat blockages.
3. Tree Root Infiltration
Piece of an sewer pipe with root intrusion damage laying on truck bed.
Older sewer lines were sometimes constructed out of clay or other porous materials. In addition, the connections between the pipe sections weren’t as tight as today’s PVC pipes.
As tree and shrub roots grow, they search for sources of water. If they latch onto a sewer pipe, they will grow into the pipe in order to reach the water inside. As the roots expand over time, it can cause the line to break.
4.Process introduction
On-site personnel carry out inspection
Leak detection engineer checks equipment, reads records and analyzes data
Find the leak
Excavate and repair leaking pipes
